一. 用途
主要用于橡胶的热炼,压片,塑炼及混炼。
二. 结构特点
1.滚筒材料为冷硬铸铁,表面坚硬耐磨辊筒结构有钻孔或中空方式进行加热或冷却,使辊面温度均匀。
2.传动系统用硬齿面减速器,结构紧凑噪音低,效率高。
3.辊筒采用调心轴承,耗能低,维修方便,使用寿命长。
4.机器设有液压力和电动力反转制动装置,当发生紧急事故时,按下开关,机器立即制动或反转,安全可靠。
5.润滑系统采用一体循环润滑式,减少漏油现象。
XK series rubber mixing mill
一.Usage
It mainly used for thermal refining, sheeting, plasticating and mixing of the rubber.
二. Structure &features
1. Roller material is Chilled cast iron, with hard & abrasion-resistant surface. Roller structure: hole drilling style or hollow style is used for heating or cooling to make even temperature for the roller surface.
2. Transmission device uses harden gear speed reducer, compact structure, efficient transmission, low noise.
3. Roller adopts self-aligning bearing, low energy consumption, easy to maintain, long lifespan.
- With hydraulic &electrical reverse braking device, you can just press the switch when urgent accident happens, and machine will immediately brake or reverse, safe & reliable.
- Lubricating system adopts the circulation lubrication type as an organic whole,seal structure with special design,saving the oil leaked.
型号model | XK-160 | XK-230 | XK-250 | XK-360 | XK-400 | XK-450 | XK-560 |
辊筒工作直径roll dia | 160 | 230 | 250 | 360 | 400 | 450 | 560/510 |
棍筒工作长度roll working length | 320 | 600 | 620 | 900 | 1000 | 1200 | 1530 |
前辊线速度front-roll liner speed | |||||||
辊筒速比roll ratio | 1: | 1: | 1: | 1: | 1: | 1: | 1: |
辊距max roll space(mm) | 7 | 8 | 10 | 10 | 15 | 15 | |
一次加胶量compound feeding capacity(kg) | 1-2 | 6-10 | 8~15 | 20~25 | 18-35 | 25-50 | 35~60 |
电动机功率motor power | 15 | 30 | 37 | 55 | 90 | ||
外形尺寸dimension: | 1380×860 | 2800×1200 | 3400×1500 | 3780×1850 | 4350×1850 | 5200×2380 | 5845×2284 |
所有评论仅代表网友意见,与本站立场无关。