堤坝U型槽钢模具

堤坝U型槽钢模具厂家生产技术是以严格的焊接标准要求，因为堤坝U型槽钢模具的生产比较精细化，尤其是在壁厚控制、长宽高尺寸的把握上都有明确的要求，误差不得超过0.5cm，而且拆模要求内外可拆结构。通过对U型槽钢模具厂家生产技术的理解，尽管U型槽存在众多的型号，但是其根本的生产技术是不变的，不管是从下料还是焊接，都是以U型为主体，采取点焊的模式，既可以节省人工，也可以保证模具质量。在长达十年的堤坝U型槽钢模具生产中，厂家不仅仅总结是对此类模板的生产经验，也是对于该模具衍生出的其他类型的水槽模具，比如矩形槽、流水槽模具等等，尽管外形或者尺寸都是不同，但是生产技术的内容都是同一原理。两年的时间里，从按图定制到自行开发设计，这一过程虽然时间短，但是彰显出我厂的生产技术以及设计水平，更主要的是客户对于我厂的信任度不断增加。

The production technology of U-shaped channel steel mould manufacturers for dykes is based on strict welding standard requirements, because the production of U-shaped channel steel mould for dykes is relatively refined, especially in the control of wall thickness, length, width and height, there are clear requirements, the error shall not exceed 0.5cm, and the inner and outer detachable structures are required for formwork removal. Through the understanding of the production technology of U-shaped channel steel mold manufacturers, although there are many types of U-shaped channel, its basic production technology is unchanged. No matter from blanking or welding, U-shaped channel is the main body, adopting spot welding mode can not only save labor, but also ensure the quality of mold. In the production of U-shaped channel steel mould for dyke for ten years, the manufacturer not only summarizes the production experience of this kind of mould, but also for other types of channel mould derived from the mould, such as rectangular groove, flume mould, etc. Although the shape or size are different, the content of production technology is the same principle. In the two years, from customization to self-development and design, although the process is short, it shows the production technology and design level of our factory, and more importantly, the customer's trust in our factory is increasing.