温馨提示： 因塑料价格有小波动，页面上的报价与当天的实际报价可能有所差异，页面报价仅供参考。因工作太忙未能及时更新报价，还望谅解! 如须了解塑料行情还请旺旺联系或电话直询。 电话：.VX：.扣扣：312811175.
Luran SC KR2864C 简介：
Luran S KR2864C is a blend of ASA and PC offering high heat resistance, good impact strength and enhanced flowability
Luran SC KR2864C 色号：
Luran S KR2864C NRShow
Luran S KR2864C BK89828Show
Luran S KR2864C SPLShow
Luran S KR2864C UV N
Luran SC KR2864C 物性表：
Properties of Luran S KR2864C
Property, Test ConditionStandardUnitValues| Rheological Properties | |||
| Melt Volume Rate 220 °C/10 kg | ISO 1133 | cm3/10 min | 10 |
| Melt Volume Rate, 260 °C/5 kg | ISO 1133 | cm3/10 min | 25 |
| Mechanical Properties | |||
| Izod Notched Impact Strength, 23 °C | ISO 180/A | kJ/m2 | 60 |
| Izod Notched Impact Strength, -30 °C | ISO 180/A | kJ/m2 | 8 |
| Charpy Notched Impact Strength, 23° C | ISO 179 | kJ/m2 | 55 |
| Charpy Notched Impact Strength, -30° C | ISO 179 | kJ/m2 | 11 |
| Tensile Stress at Yield, 23° C | ISO 527 | MPa | 63 |
| Tensile Strain at Yield, 23° C | ISO 527 | % | 4.6 |
| Tensile Modulus | ISO 527 | MPa | 2600 |
| Elongation at Break (MD) | % | 50 | |
| Flexural Strength | ISO 178 | MPa | 100 |
| Hardness, Ball Indentation | ISO 2039-1 | MPa | 110 |
| Thermal Properties | |||
| Vicat Softening Temperature VST/B/50 (50°C/h, 50N) | ISO 306 | °C | 120 |
| Vicat Softening Temperature, VST/A/50 (50°C/h, 10N) | ISO 306 | °C | 134 |
| Heat Deflection Temperature A; (annealed, 1.8 MPa) | ISO 75 | °C | 105 |
| Heat Deflection Temperature B; (annealed, 0.45 MPa) | ISO 75 | °C | 124 |
| Coefficient of Linear Thermal Expansion | ISO 11359 | 10^(-6)/°C | 70 - 90 |
| Thermal Conductivity | DIN 52612-1 | W/(m K) | 0.17 |
| Electrical Properties | |||
| Dielectric Constant (100 Hz) | IEC 60250 | - | 3.1 |
| Dissipation Factor (100 Hz) | IEC 60250 | - | 60 |
| Dissipation Factor (1 MHz) | IEC 60250 | - | 120 |
| Volume Resistivity | IEC 60093 | Ohm*m | 1E12 |
| Surface Resistivity | IEC 60093 | Ohm | 1e 013 |
| Other Properties | |||
| Density | ISO 1183 | kg/m3 | 1150 |
| Water Absorption, Saturated at 23°C | ISO 62 | % | 0.6 |
| Moisture Absorption, Equilibrium 23°C/50% RH | ISO 62 | % | 0.18 |
| Processing | |||
| Linear Mold Shrinkage | ISO 294-4 | % | 0.5 - 0.9 |
| Melt Temperature Range | ISO 294 | °C | 260 - 300 |
| Mold Temperature Range | ISO 294 | °C | 80 |
| Injection Velocity | ISO 294 | mm/s | 200 |
| Drying Temperature | °C | 100 - 110 | |
| Drying Time | h | 2 - 4 | |
主要供应的德国巴斯夫ASA/PC型号：
Luran SC KR2861/1C High heat resistance，High impact strength，高耐热，高抗冲击。 | ||||||
Luran SC KR2863C Highest heat resistance，High impact strength，超高耐热，高抗冲击。 | ||||||
Luran SC KR2864C High flow ability，High heat resistance，高耐热，流动性好。 | ||||||
Luran SC KR2866C Good heat resistance，Medium impact strength，耐热性好，中等抗冲击强度。 | ||||||
Luran SC KR2867CWU Highest flowability，V0 classification，防火V-0级，高流动。 |
所有评论仅代表网友意见，与本站立场无关。